For precision cabinets, laboratories and data centers: the CZCS-F reads temperature to ±0.1C and humidity to ±0.1%RH, shows both on an LCD, and can drive heaters, dehumidifiers or fans from the same unit. If a customer's process depends on cabinet conditions, this is the controller they should be buying.
A basic cabinet needs a thermostat for the heater and a hygrostat for the fan. The CZCS-F folds both into one DIN-rail unit: it reads temperature to ±0.1C and humidity to ±0.1%RH, shows both readings on an LCD, and drives the heater, fan or dehumidifier from the same outputs.
That matters in a lab instrument cabinet or a data center rack, where a process depends on steady conditions and an operator wants to see them at a glance. Field calibration of both sensors runs from the front panel, so there is no factory return for a drift check. Each output switches up to AC250V 5A, enough to drive most heaters and fans directly.
The KTO013 normally‑closed small thermostat is a DIN‑rail mount mechanical temperature controller designed for cabinet heating applications. Adopting a bimetallic thermal sensor and snap‑action contact, it delivers reliable temperature monitoring and automatic heating control inside electrical enclosures. The compact PC housing and wide adjustable temperature range make it widely matched with cabinet heaters, filter fans […]
EFR012 electronic hygrostat is a DIN‑rail mounted cabinet humidity controller designed for humidity management inside electrical enclosures. It adopts SPDT change‑over relay contact and built‑in LED indicator for working status display. With small hysteresis and fast 5‑second response time, this hygrostat automatically activates cabinet heaters or cooling fans once the humidity exceeds your preset value, […]
EMFR012 electronic hygrostat is a compact cabinet humidity controller designed for enclosure moisture management. Built‑in DHT20 sensing element with rotary knob for continuous humidity adjustment. It automatically activates cabinet heaters or cooling fans when humidity exceeds the preset threshold to prevent condensation and protect electrical components. This hygrostat adopts standard 35 mm DIN‑rail clip mounting for […]
The ETR011 is a compact electronic thermostat designed for precise temperature control inside electrical enclosures. It adopts an NTC sensor with small switching hysteresis and LED operating indicator. Featuring 35 mm DIN rail clip mounting, this thermostat can drive filter fans, enclosure heaters or alarm signal devices, stabilizing cabinet internal temperature and preventing overheating or condensation […]
SK3110 is an industrial electronic thermostat built with NTC sensor for precise temperature detection. It features a wide 24V–230V voltage range and an adjustable temperature scale from -20°C to +60°C. Users can choose built‑in or optional external temperature sensor to fit different cabinet measurement demands. Made of UL94V‑0 flame‑retardant PC housing, the thermostat is designed […]
SK3118 electronic hygrostat is a DIN‑rail mounted humidity controller with wide voltage input and precise humidity sensing. Equipped with an intuitive rotary setting knob with visible humidity scale, it accurately detects relative humidity and activates heaters, fans or dehumidifiers automatically to achieve moisture‑proof and dehumidification inside enclosures. Built‑in passive dry contact supports frost protection. When […]
Choose CZCS-F. It reads temperature to u00b10.1C and humidity to u00b10.1%RH and shows both on the LCD, for precision distribution boards, lab cabinets and data center racks.
Choose CZCS-F. One display unit replaces the pair and drives the heater, fan and dehumidifier from the same outputs.
The CZCS-F switches each output up to AC250V 5A. For larger loads, use a contactor.
Send the cabinet size and the loads to control. NOXT confirms the CZCS-F setup within 24 hours.
Compliance tested and documented per batch
High-precision readings on an LCD
Both sensors calibrated from the front panel
Custom set points and packaging
Yes. Both temperature and humidity sensors are field-calibratable from the front panel, no special tools.
Heater, fan or dehumidifier up to AC250V 5A. Larger loads via contactor.
Yes, u00b10.1C/u00b10.1%RH precision with LCD readout is well matched to data center and lab requirements.
Please fill out the form below and we'll contact you as soon as possible.
